Power & Charging:
The Ivation™ Portable Smart Washer can be powered in one of two ways:
a. By connecting the Power Cord (9) to your vehicle’s power port and toggling the
Power Switch (5) to the “II” position.
b. By toggling the Power Switch (5) to the “I” position and thus drawing power from
the internal rechargeable battery.
Note:
Some vehicles require that ignition be in accessory position.
Important:
Disconnect Power Cord (9) whenever vehicle engine is turned off for
extended period of time, as some vehicles continue charging connected devices
even when the engine is off. The vehicle’s battery charge may be depleted if
left connected.
Given the advanced power circuits within the Smart Washer, the built-in battery can
only be charged by way of the included Wall Charger (14):
1. Toggle Power Switch (5) to “O” position.
2. Connect Wall Charger (14) to Charging Inlet (6).
3. Charging Indicator (19) will light up red while battery is charging, and change to
green when it reaches full charge.
4. On a full charge, the internal battery can run for 35 continuous minutes.
Controlling the Water Flow:
- Pulling the Spray Gun (15) trigger starts the water flow, and releasing the trigger stops the flow.
- For a continuous flow, pull trigger forward into position 1 or position 2.
- To adjust the flow output, turn the Adjustable Nozzle Head (20) clockwise and counterclockwise until
desired output level is reached.
About the Auto-Off Feature:
When the trigger is released, the dynamic pressure automatically shuts off
the washer’s motor. When the trigger is then pressed again, the pressure
drop automatically activates the motor, and new pressure begins building
up. To ensure that this automatic shutoff feature functions correctly, please
wait 5-10 seconds to engage trigger after releasing it.
1
2
5
