Setting HI (Maximum) BARBECUE Temperature
1 Press the HI/HR button to display the maximum BARBECUE temperature, which will only be displayed for 5 seconds. The maximum
BARBECUE temperature range is 140˚ F – 572˚ F and the default setting is 176˚ F. Note: The unit will not allow you to set the maximum
BARBECUE temperature below the minimum BARBECUE temperature.
2 Press and hold the HI/HR button until the digits flash.
3 Press the HI/HR button to set your desired temperature. It will increase one with each press. Press and hold the HI/ CLEAR button
to fast increase.
4 Press the LIGHT/ MODE button to confirm the setting. Note: Press the HI/HR button to read your set maximum BARBECUE
temperature.
Setting LO (Minimum) BARBECUE Temperature
1 Press the LO/MIN button to display the minimum BARBECUE temperature, which will only be displayed for 5 seconds. The minimum
BARBECUE temperature range is 32˚ F – 554˚ F and the default setting is 50˚ F. Note: The unit will not allow you to set the minimum
BARBECUE temperature above the maximum BARBECUE temperature.
2 Press and hold the LO/MIN button until the digits flash.
3 Press the LO/MIN button to set your desired temperature. It will increase one with each press. Press and hold the LO/MIN button to
fast
increase.
4 Press the LIGHT/MODE button to confirm the setting.Note: Press the LO/MIN button to read your set minimum BARBECUE
temperature.
Activating the Temperature Alarm
You can press the ALERT, ˚ C /˚ F, START/STOP button to activate the temperature alarm for BARBECUE & FOOD. The alarm icons will
appear beneath the FOOD & BARBECUE icons.
The receiver will beep with the alarm icon and probe temperature flashing if:
a) The actual FOOD temperature has exceeded your set maximum FOOD temperature. (Beep twice in every second)
b) The actual BARBECUE temperature has exceeded your set maximum BARBECUE temperature. (Beep once in every second)
c) The actual BARBECUE temperature has fallen below your set minimum BARBECUE temperature. (Beep once in every second)
Note: The minimum BARBECUE temperature alarm will not be activated until the actual BARBECUE temperature goes above the set
minimum
temperature.
For example: You set the minimum BARBECUE temperature as 220˚ F and press the ALERT, ˚C / ˚F, STOP/START to activate the alarm.
The unit will NOT beep or flash even if the actual BARBECUE temperature is below 220˚ F. It assumes that your BARBECUE is not up to
temperature. Only when the actual BARBECUE temperature goes over 220 ºF, then falls below 220 ºF, can the alarm be activated, the
unit will beep and flash.
Note: The unit will retain your Barbecue & Food alert temperature settings even after the unit is turned off.
timer mode
Count Down
1 Press and hold the LIGHT/MODE button to switch the unit from THERMOMETER MODE to TIMER MODE. The timer 0:00, with a small
icon TIMER will be shown on the lower part of the display.
2 Press the HI/HR button to set the hour and LO/MIN button to set the minute.
3 Press the ALERT, ºC /ºF, START/STOP button to start countdown. The icon “ ” will blink.
4 Press the ALERT, ºC /ºF, START/STOP button to stop the countdown. The “ ” will be solid.
5 Press the HI/CLEAR button to clear the setting back to 0:00.
Note: The minimum setting for the timer is 1 minute and the maximum setting is 24 hours. It will be displayed as hours & minutes
when the timer does not exceed 10 hours. Once it exceeds10 hours, only the hour can be displayed. When the countdown reaches
“0:00” the timer starts counting up and it will beep for 30 seconds. The “0:00” and “ ” will blink. Press the ALERT/˚C / ˚F /START/STOP
button to stop the beep.
Count Up
1 Press and hold the LIGHT/MODE button to switch the unit from THERMOMETER MODE to TIMER MODE. The timer 0:00, with a small
icon TIMER will be shown on the lower part of the display.
2 Press the ALERT, ˚C /˚F, START/STOP button to start count up. The icon “ ” will blink.
3 Press the ALERT, ˚C /˚F, START/STOP button to stop the count up. The “ ” will be solid.
4 Press the HI/CLEAR button to clear the setting back to 0:00.
Note: When the count up timer reaches 9:59, it will keep displaying as 9:59, meanwhile, the unit beeps with the “ ” icon blinking for
30
seconds.
Note: The unit will retain your timer settings even after the unit is turned off.
Temperature Display Formats
Press and hold the ALERT, ˚C /˚F, START/STOP button for 2 seconds to switch between ˚C and ˚F.
