8
Setting the Timer
You can program the dehumidifier to start or stop automatically at a prescribed time between
0.0 and 24 hours. Press the timer button to begin the auto start or auto stop function.
• Setting Auto Start and Stop Times
1. Turn the unit off.
2. Press the Timer button. The Timer On indicator light will illuminate. This indicates that
the Auto Start function is initiated. (If you press the Timer button again, the Timer Off
indicator light will illuminate.)
3. Press or hold the increase and decrease buttons to enter a time interval between 0.0
and 24 hours. Time will increase or decrease in 0.5 hour increments up to ten (10) hours,
and thereafter in one (1) hour increments up to 24 hours.
4. The selected start time will show in the LCD display in a few seconds. The LCD display will
then automatically revert to showing the humidity setting.
5. To program an automatic stop time, press the Timer button again (the Timer Off indicator
light will illuminate) and repeat the steps above.
• Setting Auto Stop When Unit is Running
1. Press the Timer button. The Timer Off indicator light will illuminate. This indicates that the
Auto Stop function is initiated.
2. Press or hold the increase and decrease buttons to enter a time interval between 0.0
and 24 hours. Time will increase or decrease in 0.5 hour increments up to ten (10) hours,
and thereafter in one (1) hour increments up to 24 hours.
3. The selected stop time will show in the LCD display in a few seconds. The LCD display will
then automatically revert to showing the humidity setting.
NOTE:
• When the Auto Start and Auto Stop times are set within the same program sequence, the
Timer On/Off indicator lights illuminate together signaling that both on and off times are
now
programmed.
• Turning the unit On or Off at any time or adjusting the timer setting to 0.0 will cancel the Auto
Start/Stop
function.
• When LED display window displays the code P2, the Auto Start/Stop function will also be canceled.
Humidity Setting
• The humidity level can be set between 35% RH and 85% RH in 5% increments. Press the
increase and decrease buttons to lower the % number for drier air or to raise the %
number for moister air. You will see the numbers in the LCD display.
• Once the humidity level is set, the LCD display will show the actual room humidity level
(
±
5% accuracy).
• The dehumidifier will cycle on and off in order to maintain the selected humidity level.
Continuous Operation
• To run the dehumidifier continuously regardless of the relative humidity in the room, press
the decrease button until 0 appears.
• The "Cont." indicator light will illuminate.
• The unit will run continuously until the water reservoir is full.
• To stop continuous operation, press the increase or decrease button to set a relative
humidity
level.
