Error Codes and Protection Code:
AS
Humidity sensor error: Unplug the unit and plug it in again. If error repeats, call for service.
ES
Temperature sensor error: Unplug the unit and plug it in again. If error repeats, call
for
service.
EB
Reservoir is removed or not in the right position. Replace the reservoir in the right position.
P2
Reservoir is full. Empty the reservoir.
Additional Features
Full Light:
Glows when the reservoir is ready to be emptied, when the reservoir has been
removed or has not been replaced in the proper position.
Auto Shut Off:
The dehumidifier shuts off automatically after 30 seconds when the reservoir
is full, or when the reservoir is removed or not replaced in the proper position. When the set
humidity level is reached, the unit will also shut off automatically. For some models, the fan
motor will continue operating.
Auto Defrost:
When frost builds up on the evaporator coils, the compressor will cycle off and
the fan will continue to run until the frost disappears.
Three (3) Minute Restart Delay:
After the unit has stopped, it cannot restart within the first
three (3 ) minutes. Operation will automatically start again after three (3) minutes.
Check Filter Feature:
The system starts to count down the time once the fan motor operates.
The Check Filter feature can only be activated when the total operation time reaches 250 hours
or more. The Reset Light (Clean Filter indicator) flashes once per second if the filter requires
cleaning. Press the Filter button and the Reset light (Clean Filter indicator light) will turn off.
Auto-Restart:
If the unit shuts off unexpectedly due to a power outage, it will restart with
the previous function setting automatically when the power resumes.
5
