Remote Control:
5
1 LED Indicator Light
Illuminates when any button is pressed on the remote control
2 Heater Mode Button
Toggles between the three heat modes available
3 Temp Down Button
Decreases the set temperature value
4 ON/OFF
Button
Powers the heater ON/OFF
5 Dimmer
Button
Toggles between three available flame effect brightness modes
6 Time
Engages the ON / OFF Timer
7 Temp Up Button
Increases the set temperature value
7
5
1
2
3
4
6
Operating Instructions:
1. Turn the heater on or off by pressing the POWER
button on the control panel (Figure C) or by pressing
the ON/OFF button on the remote control (Figure B).
Note: Once the power is off, the internal heating
elements will stop working first. The fan will continue
working for up to 90 seconds to deliver residual heat
from inside the heater. This is a normal function.
2. Select a heat setting by pressing the MODE button
on either the control panel (Figure C) or the remote
control (Figure B) to toggle between the three
heat
settings.
Power for HIGH mode is 1,500W while the power for
LOW mode is 1000W. ECO mode is an Economic Energy
Saving Function. When ECO mode is chosen, the heater
will operate to maintain a constant temperature of
68°
Fahrenheit.
1
C
B
ON/OFF
POWER
2
HIGH
LOW
ECO
C
B
H / L / E
