1
3
4
5
6
2
Controls and Features
Product may vary slightly from illustration
1. Switch
button
2. Motor
3. Ice
box
4. Ring
5. Base
6. Snow cone cup holder
Preparing for Use
1. Unpack the Ice Shaver carefully,
removing all packaging materials.
Check the contents to ensure that
all parts and accessories are present,
and are in good condition.
2. Handle the shaving blade with caution.
WARNING: Do NOT touch blades. Blade
attachments are very sharp. Use extreme
care when handling. Failure to do so
can result in personal injury.
3. Wash the ice shaver bowl carefully. Rinse and dry thoroughly.
WARNING: DO NOT IMMERSE THE MOTOR IN WATER.
General Operation
1. Fill your regular ice tray with water and place it in the freezer until the ice cubes
are completely frozen. Standard ice cubes work best in the ice shaver.
2. Place the ice shaver bowl on top of the base, align the tabs with the slots and
gently press down until the shaver bowl locks into place. Make sure the dots are
properly aligned. The shaver bowl should not be removed after it is locked into place.
3. When the cubes are completely frozen, remove from the tray and place them into
the ice shaver bowl.
4. Do not fill ice above the MAX Line. If the ice shaver bowl is overfilled, the unit will
not work properly.
5. To use the included paper cone cups, place the cone cup holder into the base
opening and make sure it is properly locked. To use larger bowls, remove the cup
holder and place it on the base of the ice shaver.
6. To remove the cone cup holder, gently lift up the cup holder in one single movement.
Note: Please do not attach the cup holder if you are using a large bowl.
7.
Place the shave motor on top of the ice, plug into the electrical outlet and press
and hold down the power button. The unit will start working and it will start
shaving the ice. To stop the unit, just remove hand from the top button.
8. The snow cone maker will switch off automatically once shaving the ice has
been
completed.
9. The unit will not work if there is no ice in the ice shaver bowl.
10. Add your favorite syrup and serve.
11. Unplug the unit immediately after use.
User Maintenance
This appliance requires little maintenance. It contains no user-serviceable parts. Any
servicing requiring disassembly other than cleaning must be performed by a qualified
appliance repair technician.
Care and Cleaning
CAUTION: Never immerse the motor base, plug or cord in water or any other liquid.
1. Always unplug the ice shaver before cleaning.
2. Whenever possible, rinse parts immediately after processing to make cleanup
easier.
CAUTION: Use extreme care when handling blades. Do not touch the
blades with your fingers. The blades are very sharp and can cause injury if touched.
3. The motor base may be wiped with a damp cloth or sponge. Dry thoroughly.
WARNING: DO NOT IMMERSE THE MOTOR BASE IN WATER.
Storage
1. Unplug and clean unit.
2. Store in original box or in a clean, dry place.
3. Never store ice shaver while it is hot or plugged in.
4. Never wrap cord tightly around the appliance. Never place undue stress on the
cord, especially where the cord enters the unit, as this could cause the cord to
fray and/or break.
This product is covered by a limited one-year warranty. Coverage is subject to limits
and exclusions. See warranty for details.
Customer Service:
[email protected]
866-849-3049
Distributed by
C & A Marketing
2 Bergen Turnpike
Ridgefield Park, NJ 07660
Made in China
Ivation is a trademark of
C&A IP Holdings, LLC
©2015 All rights reserved
