IV Produkt Control Unit IVC3
IVC3 Basic Manual 2004-12-15.doc
14/18
Clock
Setting
Description
Actual time
Time: 00:00-24:00
Day: 1-7
Actual day, hour and minute
Program. mode
D= 1-5, 6-7
D= 1,2,3,4,5,6,7
Group settings (workdays and weekend)
Individual day settings
Day:
X(-X)
Time:
X
00:00
Mode:
Stop
Time: 00:00-23:30
Mode:
Stop,normal,forc.
Setting of event time (hour or half-hour) for each
day (four different) or each group (four different)
and operating mode for each event.
-button or -button to manoeuvre in time
schedule.
5. Manual overrun of output
The outputs can be manual set (0-100%) by operating terminal at test and function control.
Setup
Setting
Description
Manual operation Off/On
Make outputs available for manual overrun
Run-LED (yellow) pulse indicates when an output is manually set.
Only configured outputs are enable for manual overrun. Not configured outputs are hidden or
displayed not installed.
Settings
Setting
Description
SA man.
0-100%
Supply air fan, manual overrun output-value
EA man.
0-100%
Exhaust air fan, manual overrun output-value
Rot. VVX man.
0-100%
Revolving heat recovery, manual overrun output-value
H-valve man.
0-100%
Heater valve, manual overrun output-value
C-valve man.
0-100%
Cooler valve, manual overrun output-value
El heater man.
0-100%
Electrical heater, manual overrun output-value
CP heat man.
0-100%
Cirkulation pump, manual overrun output-value
CP cool man.
0-100%
Cirkulation pump, manual overrun output-value
DX cool man.
0-100%
Cirkulation pump, manual overrun output-value
6. LED
LED on operating terminal and controller indicates RUN and ALARM status.
6.1 LED – RUN
Diodstatus Function
Dark
Unit stop
Pulse
Manual run
Lit
Normal run
6.2 LED - ALARM
Diodstatus Function
Dark
No alarm
FastLit
Alarm
