Page 29 (44)
Ver 2_en_2022-06-27
Assembly Instructions
Envistar Top
7.7
Assemble counter-flow exchanger in sectioned confi-
guration
The counter-flow exchanger can be disassembled for easier passage through confined
spaces.
00061
1
3
2
Figure: Counter-flow heat exchanger, sectioned configuration
1. Corner strut
2. Approximate location of quick connectors
3. Joint fixings
Take apart counter-flow heat exchanger
1. Divide the electric quick connectors for the damper motors. See
"6.3 Quick connectors”,
page 20.
2. Loosen hoses.
3. Loosen and remove bolts and screws in corner struts and joint fixings.
4. Pull the parts apart without damaging the sealing strip between the parts.
Assemble counter-flow exchanger.
1. Slide the parts together without damaging the sealing strip.
2. Screw the parts together on the corner struts and joint fixings.
3. Fit back hoses.
4. Put together the quick connectors for the damper motors.
5. Connect drainage.
