Page 27 (44)
Ver 2_en_2022-06-27
Assembly Instructions
Envistar Top
7.5
Assemble Envistar Top counter-flow exchanger (TEM,
TXM)
00136
2
1
3
4
4
Figure: Envistar Top counter-flow exchanger (TEM) in left-hand version: location of sealing strips
1. Exhaust air part
2. Counter-flow exchanger part (no sealing strip)
3. Supply air part
4. Sealing strips
1. Read
"7.1 Before assembly”, page 23.
2. Get out layout drawings and tools.
3. Assemble adjuster feet (accessories) if these are included.
4. Fit sealing strips.
5. If the counter-flow exchanger is in sectioned configuration, assemble the part according
to.
"14. Ensure everything is properly iassembled.”, page 28
.
6. Push and fit together the exhaust air part and supply air part with the counter-flow
exchanger part.
7. For sizes 04, 06 and 10 in block design: Pull the red hoses (plus) from the supply air part
and the exhaust air part to the counter-flow exchanger part and connect with the respec-
tive hose ends up in the filter part.
8. Connect the unit parts together with quick connectors and assemble other control equip-
ment.
9. Fit cover details at the joints.
10. Reassemble cover plugs to prevent internal leakage.
11. Connect drainage and water trap. See
"11.3 Connect drainage pipe to floor drain”, page
38.
12. Ensure everything is properly assembled.
