Page 28
Operation and Maintenance Instructions
THE NEW EcoHeater
DSEH180401.00.EN
Continuous product development may give rise to specification changes without notice.
5.7 Heat pump section (compressor part)
General
The IV Produkt EcoHeater has been designed and fabricated along given
operating parameters that must be met in order for the unit to operate optimally
and provide good operating economy. The operating parameters must not be
changed unless a check is first made to ascertain that the changes will be within
the unit’s operating range.
Requirements and guidelines for handling refrigerant
See "1.7 Handling of refrigerant" on page 4.
Periodic service and inspection
Conditions and guidelines for service are described under "5.1 General" on page
The inspection points and other annual service are specified in a separate
protocol, see
.
Access to compressor
The compressor is accessed from three different access points; inspection door,
control cabinet and service hatch, depending on available space and service
operation.
3
1
2
1. Inspection door
2. Control cabinet
3. Service hatch
