5
PINNER APPLICATORS
5200647 Rev G
3. SPECIFICATIONS
Dimensions
Linear
5-Point
Claw
Overall Length
4.75”
6.75”
6.75”
Handle Diameter
.75
.75
.75
Charge Pattern
Linear Pinner and Pinner Claw: 0.5” x 2.5” to 1” x 5” elliptical;
5-Point: 1” x 2” circular pattern
Ion Output Current
at 0.5” from Ground
(kV)
20
25
30
50
5-Point (µA)
73
91
110
183
Claw (µA)
80
100
120
200
Operating Voltage
±30 kV max; ±50 kV in special installation with insulation required
(minimum 3” space clearance from all non-insulated ground sources)
Cable
10’ standard length
Mounting
Standard: Insulative brackets with fastening hardware
Optional: Manual adjust gooseneck with easy lock/release feature
Operating Distance
30 kV - 0.5” min; 50 kV - 1” min
Current Limit
30 kV input - 375 µA; 50 kV input - 625 µA
Short Circuit
Pin to Ground at 30 kV Input, Non-Repetitive: 2-second maximum, no damage
Weight
0.65 lbs
4. INSTALLATION
NOTE
– To install pins into Pinner Claw:
1. Push blunt end of pin into head’s socket
2. Rotate pins until desired ion pattern is produced
Standard Installation
Two mounting clamps and hardware are standard with each Pinner applicator. The
mounting clamps are made of insulative material to prevent voltage breakdown of
the applicators.
Before attaching the applicator to the mounting clamp, insert the shrink tubing
supplied with the mounting kit, over the round handle of the applicator. The shrink
tubing ensures that the applicator is firmly attached to the mounting clamp. The
tubing is not required when mounting the applicator to the optional FlexArm stand.
Shrink tubing is required for each mounting clamp.
