Aerostat XC Heater 5100550-M Rev 7
7
2.2 Location
The Aerostat XC is designed for free or fixed position operation on
a table top or work bench surface. Each unit includes an adjustable,
skid resistant stand intended for placement onto the selected
surface. Holes in the base of the stand are provided for securing the
unit in a fixed location using 5/16 diameter screw hardware (not
provided).
An optional pedestal kit is available for elevated mounting.
For extremely dusty environments, an optional air filter kit is
available. The air filter kit includes support brackets, screw
hardware, and a polymer foam air filter. The air filter is cleanable
and reusable. See section 5 for air filter ordering part numbers
The Aerostat XC should be placed approximately 1 to 3 feet (0.3 to
1.0 meters) from the objects to be neutralized or the critical work
area. It should be positioned to cover as much of the area with the
ionized air stream as possible. The air stream can be directed
upward or downward by tilting the unit within the stand. Tightening
the lock knobs on each side of the unit secures it in position.
Summary of Contents for Simco-Ion Aerostat XC
Page 1: ...I O N I Z A T I O N S O L U T I O N S Ionizing Air Blower Aerostat XC User s Manual ...
Page 10: ...Aerostat XC Heater 5100550 M Rev 7 5 2 Installation 2 1 Unpacking 2 2 Location 2 3 Electrical ...
Page 14: ...Aerostat XC Heater 5100550 M Rev 7 9 3 Operation 3 1 Controls Indicators ...
Page 29: ...Aerostat XC Heater 5100550 M Rev 7 24 5 3 Dimensional Drawing ...
