14
V. Basic operation of cell phone
Switch on
Press and hold on ―ON/OFF‖ to start up the cell phone. If no password settings are given for the SIM card
and cell phone, the phone will search for a network automatically, and when the cell phone registers a network,
the name of the network supplier will be shown on the screen. You can now answer or make a call.
If the display indicates ―Insert SIM card 1‖or‖Insert SIM card 2‖ after the start-up, please power off your
phone, and check whether your opposite SIM cards have been installed correctly or hasn't yet been installed or
not.
After plugging into a SIM card, the phone will automatically check SIM card for availability, then the
display screen will indicate the following prompts in sequence
：
1)
―Enter phone lock password‖ ―― if you have started up the phone lock (default password: 1122.)
2)
―Enter SIM card 1/2 PIN‖ ―― if you have started up the SIM card 1/2 lock.
3)
―No service‖ ―― it represents the register network failure, and you can't call at this time.
4)
―Emergency Call‖ ―― it allows to call 112.
5)
―Search‖ ―― the phone is searching a network, until it finds out a suitable service network.
6)
The screen displays the network operator name – it represents the network register success.
If only SIM 1 card is installed and the current mode is ―SIM card 1 only‖, the screen will display the name
of SIM card 1 provider only and that ―SIM card 2 is off‖; if only SIM card 2 is installed, the screen displays in
reverse. If only SIM card1 is installed and the current mode is ―two cards on‖, the screen will display the name
of SIM card 1 provider only and that ―Please insert SIM card 2‖; if only SIM card 2 is installed, the screen
displays in reverse.
Switch off
If you want to shut down the cell phone, please long press ON/OFF key, and after the screen displays the
power off animation, the cell phone will shut down. Please don’t shut down the phone directly by dismantling
