ITT VOGEL LM 100-160, Installation, Operation And Maintenance Manual

Page: 48 / 70

Installation, Operating and Maintenance Instruction
Model LM, LMN
LM ger/fr/eng Page 44
Revision 02
Article No 771073101 Issue 01/2009
Suction nozzle Discharge nozzle
Forces in N Torques in Nm Forces in N Torques in Nm Size
∅
DN
Fx Fy Fz
∑
F Mx My Mz
∑
M
∅
DN
Fx Fy Fz
∑
F Mx My Mz
∑
M
LMN 32-125 50 465 420 380 730 395 280 322 575 32 255 240 295 465 310 210 240 450
LMN 32-160 50 465 420 380 730 395 280 322 575 32 255 240 295 465 310 210 240 450
LMN 32-200 50 465 420 380 730 395 280 322 575 32 255 240 295 465 310 210 240 450
LMN 40-125 65 590 520 475 925 420 310 335 615 40 310 280 350 550 365 255 295 535
LMN 40-160 65 590 520 475 925 420 310 335 615 40 311 280 350 550 365 255 295 535
LMN 40-200 65 590 520 475 925 420 310 335 615 40 312 280 350 550 365 255 295 535
LMN 40-250 65 590 520 475 925 420 310 335 615 40 313 280 350 550 365 255 295 535
LMN 50-125 65 590 520 475 925 420 310 335 615 50 420 380 465 730 395 280 325 575
LMN 50-160 65 590 520 475 925 420 310 335 615 50 420 380 465 730 395 280 325 575
LMN 50-200 65 590 520 475 925 420 310 335 615 50 420 380 465 730 395 280 325 575
LMN 50-250 65 590 520 475 925 420 310 335 615 50 420 380 465 730 395 280 325 575
LMN 65-125 80 700 630 575 1110 450 322 365 660 65 520 475 590 925 420 310 335 615
LMN 65-160 80 700 630 575 1110 450 322 365 660 65 520 475 590 925 420 310 335 615
LMN 65-200 80 700 630 575 1110 450 322 365 660 65 520 475 590 925 420 310 335 615
LMN 65-250 80 700 630 575 1110 450 322 365 660 65 520 475 590 925 420 310 335 615
LM 65-315 80 700 630 575 1110 450 322 365 660 65 520 475 590 925 420 310 335 615
LMN 80-160 100 940 840 760 1470 490 350 410 730 80 630 575 700 1110 450 322 365 660
LMN 80-200 100 941 840 760 1470 490 350 410 730 80 630 576 700 1110 450 322 365 660
LMN 80-250 100 942 840 760 1470 490 350 410 730 80 630 577 700 1110 450 322 365 660
LM 80-315 100 943 840 760 1470 490 350 410 730 80 630 578 700 1110 450 322 365 660
LM 100-160 125 1110 1000 900 1740 590 420 535 855 100 840 760 940 1470 490 350 410 730
LM 100-200 125 1110 1000 900 1740 590 420 535 855 100 840 760 940 1470 490 350 410 730
LM 100-250 125 1110 1000 900 1740 590 420 535 855 100 840 760 940 1470 490 350 410 730
LM 100-315 125 1110 1000 900 1740 590 420 535 855 100 840 760 940 1470 490 350 410 730
LM 125-200 150 1400 1260 1140 2200 700 490 575 1025 125 1000 900 1110 1740 590 420 535 855
LM 125-250 150 1400 1260 1140 2200 700 490 575 1025 125 1000 900 1110 1740 590 420 535 855
LM 125-270 150 1400 1260 1140 2200 700 490 575 1025 125 1000 900 1110 1740 590 420 535 855
LM 150-250 200 1880 1680 1510 2930 910 650 750 1350 150 1260 1140 1400 2200 700 490 575 1025
LM 150-315 200 1880 1680 1510 2930 910 650 750 1350 150 1260 1140 1400 2200 700 490 575 1025
3.8 Permitted pressures and temperatures
Basically the values, regarding pressures and
temperatures, given in the data sheet and / or the
order confirmation, as well as on the name plate are
valid. Exceeding or remaining under of these values
are undue. If there are no pressures and / or
temperatures mentioned in data sheet and / or order
confirmation, the following limits are valid for suction
pressure and room temperature:
Suction pressure (System pressure) = Pressure at
pump suction: max. 5 bar
Ambient temperature max. 40°C.
On application of pumps local laws and regulations
must be noticed, as well (e.g. DIN 4747 or DIN 4752,
section 4.5).