Enclosure 6N Pressure Switches
Page i
Manual No. 610-0009 REV L
Neo-Dyn
®
28150 Industry Drive
Valencia, CA 91355
Tel: (661) 295-4000
Fax: (661) 294-1750
World Wide Web: www.neodyn.com
©Copyright 2002
ITT Industries
Important Information
The product warranty applicable to this ITT Neo-Dyn
®
instrument is as stated on the last page
of this manual.
Should any after-delivery problems arise, please contact ITT Neo-Dyn’s Customer Service
using the information above. Our normal business hours are weekdays, 7:00 am to 3:30 PM,
Pacific Time.
Before installing this Pressure Switch, become familiar with the installation and adjustment
instructions in Chapters 2 and 3
WARNING
Indicates a hazard which can cause severe personal injury, death, or substantial
property damage if the warning is ignored.
CAUTION
Indicates a hazard which will or can cause minor personal injury or property damage if the
caution is ignored.
SPECIAL CONDITIONS
FOR SAFE USE
The electrical snap switch assemblies shall be installed such that the equipment wiring is
protected from mechanical damage by the use of metal conduit or a method providing
equivalent protection. The equipment wiring must not be subjected to tension or torque. If it is
to be terminated within a potentially explosive atmosphere, a suitably certified termination
facility must be used.
NOTE
Indicates additional information about a particular item necessary to the operation of the unit.
This document contains proprietary information, which is the property of Neo-Dyn
®
, a unit of
ITT industries. This document may not be reproduced, either in part or in full, without the
consent of ITT industries.