8
3.
Preparation before Use
3.1
Install your SIM card
When you register your phone number, you can apply for two
different numbers and two different network providers. Then you
will get two SIM cards (Subscriber Identity Module cards
With the two SIM cards, you can use all functions of the
phone. Many parameters required for communication are
memorized in SIM cards and personal information including PIN
code (Personal Identity Number code), phone book, short
message and other additional system service can be stored too.
) provided
by network providers.
Warning: Don’t distort or scratch SIM cards. Don’t let them got
to static electricity, dust or water either. If the SIM cards are lost,
please contact your network operators immediately so as to seek
help.
Please switch off your phone before installing SIM cards. The
SIM cards shall be installed in back of the phone.
Please install the SIM cards according to following
diagrammatic presentation.
Note:
The SIM cards are tiny objects so please keep them out of children’s touch for fear that they may put them into mouth
by mistake!
3.2
Install memory card
The phone has no enough memory space itself. If you need to use some functions, you may need to install memory card
(T-FLASH memory card is used in this phone.)
Install T-FLASH card: Open the buckle of T-FLASH card, insert T-FLASH card into the jack and then a prompt “insert memory
card” will appear in the screen. Fasten the buckle and installation is finished.
Remove T-FLASH card: Open the buckle of T-FLASH card, press T-FLASH card inwards lightly and then it will come out
