7.3 Turbine Bowl-Wear Rings Removal
1.
Utilizing a diamond point chisel, cut two "V" shape grooves on the bowl wear ring approximately 180
degrees apart. Use extreme care not to damage the wear ring seat.
Figure 8: Cut "V" shape grooves on bowl wear ring
2.
With a chisel or equal, knock the end of one half of the ring in, and pry ring out.
Figure 9:
3.
On special materials such as chrome steel, set up the bowl in a lathe and machine the wear ring off,
use extreme care not to machine or damage the ring seat.
7.3 Turbine Bowl-Wear Rings Removal
VIS Installation, Operation and Maintenance Instructions
27
Summary of Contents for Goulds Pumps VIS
Page 1: ...Installation Operation and Maintenance Instructions VIS ...
Page 2: ......
