Figure 3: Leveling with wedges
When the grout has hardened and the anchor bolts are permanently secured, recheck level.
NOTICE:
On large subbases/floorplates, shimming is recommended to be at 61cm | 24" spacing.
Figure 4: Leveling with blocks and shims
3.4 Install pump, driver, and v-belt drive
3.4.1 Install and align the sheaves
Before installing the driver onto an overhead motor mount or side-by-side base, ensure that Foundation
requirements and baseplate mounting procedures sections are complete.
Alignment procedures must be followed to prevent unintended contact of rotating parts. Fol-
low coupling manufacturer’s installation and operation procedures.
3.4 Install pump, driver, and v-belt drive
14
Model JC Installation, Operation and Maintenance Instructions
