Page 14
and let the belt run at a speed of 8-10 KPH. Use the 6 mm Allen Wrench provided to turn the rear
roller adjustment bolts in order to centre the belt. If the running belt is shifting to the left, turn the
left adjustment bolt 1/4 turn clockwise, and the running belt should start to correct itself.
Tool:
6 mm Allen Wrench
If the running belt is shifting to the right, then turn the right adjustment bolt 1/4 turn clockwise, and
the belt should start to correct itself. Keep turning the adjustment bolts until the running belt is
properly centered.
Tool:
6 mm Allen Wrench
If the running belt is slipping during use, turn off and unplug the treadmill. Using the 6 mm Allen
Wrench provided, turn both left and right rear roller adjustment bolts 1/4 turn clockwise, then turn
the main power switch back on and run the treadmill at a speed of 8-10 KPH. Run on to the
running belt to determine if the belt is still slipping. Repeat this procedure until the belt no longer
slips.
Tool:
6 mm Allen Wrench
