ITS Telecom ITS-17VD, Installation Instructions Manual

Page: 15 / 20

12
◎
Press
＂ ＂
controller displays from Parameter 0 to
Parameter 13 in turn with current actual value.
◎
Press SET to activate, controller displays flashing value.
◎
Press
＂ ＂
or
＂ ＂
to change value.
◎
Press SET again to confirm.
◎
Display will show confirmed value and return to standby
or running status interface in about 5 seconds.
NOTE: All parameters can be changed under standby or running status.
5.7. Setting time
◎
Press
SET
to activate time setting.
◎
When data of hour is flashing move
＂ ＂
or
＂ ＂
to fix it and confirm setting by pressing SET again.
◎
When data of minute is flashing move
＂ ＂
or
＂ ＂
to fix it and confirm setting by pressing SET again.
5.8. Setting TIMER ON/OFF
◎
Press to activate timer setting for ON, 00:00 and ON icon will be flashing together.
◎
Press again, controller displays with flashing hour and ON icon only, move
＂ ＂
or
＂ ＂
to
fix the hour on the timer to start on the unit.
◎
Operate in the same way to set the minute on the timer.
◎
After TIMER ON is completed continue to press to
activate timer OFF setting, 00:00 and will be flashing
with OFF icon, set and operate in the same way .
◎
Press for final confirmation.
◎
Controller will display with ON and OFF if the timer
has been set.
◎
Press to activate, timer and ON/OFF will be both flashing.
◎
Press SET to cancel timer.
◎
When ON an d OFF doesn’t display on the controller timer has been cancelled.
5.9. Cancellation of TIMER ON/OFF
NOTE: TIME AND TIMER SETTING CAN BE CHANGED UNDER STANDBY OR RUNNING STATUS.
5.6. Setting Parameters