Screen Display Introduction
Light Strips Reflecting Air Quality
(if flashing it is time to replace the filter)
Air Quality Reading
Temperature
Humidity Level
PM2.5 Inspection/ Anion Function/
APP Connection
Air Quality Level
Fan Speed
Start Button:
When purifier is powered up, “Start” button
will turn red (standby-mode). Press the “Start” button to
start. Power consumption is less than 2W on standby
mode. System will shut down completely once power is
turned off.
Smart Button:
During start up, air purifier works in Smart
Mode by default, and will automatically control fan speed
according to air quality (TVOC level) of the surrounding
area. To exit Smart Mode, manually press any button (Sleep
or Fan Speed).
Anion Button:
Press “ON ANION” button on the remote
control to activate ANION function which produces
negative ion to precipitate fine dust particles. To deactivate,
press “OFF ANION” button once.
Fan Speed Button:
Press Fan “Speed” button on the
control panel or remote controller to set fan speed. When a
certain speed is chosen, the corresponding indicator light
will show.
Sleep Mode:
Press “Sleep” button on control panel or
remote control, the air purifier will enter Sleep mode and
electrical motor will run at their lowest speed. Only “Sleep”
button will be lighted on the control panel. Press other
buttons (except Start button) to exit Sleep mode.
WIFI (Enable Remote Control via Mobile APP):
• Download “Envure” app from App Store/Google Play
• Run the downloaded app and register a user account
• Connect your mobile to home/office WIFI
• Turn off purifier for 5 seconds and then on again.
• Press and hold SMART button for 3 seconds (or press WIFI button on remote
control) to turn the unit into pairing mode. You will see “WIFI” flashing on
purifier panel.
• Select “Add Device” on the APP and choose “Air Purifier” icon from the list.
• Click “Finished Network Configuration”.
• Key in your WIFI password and press OK to continue the set up.
• The APP will register your unit once installation is completed.
• If installation fails, repeat the above processes. The purifier is unable to
connect if there is a firewall, please disable firewall and try again.
• You can observe air quality reading, power on/off or select fan speed
from the APP.
NOTE: If WIFI button on the remote control is pressed again, the remote control via mobile
APP needs to be set up again.
