ITS Telecom CelluLine CGW-T, Installation And Programming Manual, Page: 21 / 30

CelluLine CGW-T Installation and Programming Manual 15
Operation Command Default
Time-out value in
seconds. This defines
how much time the
CGW-T waits before
dialing the number
shorter than the
maximum number of
digits defined with *300). *310 + X
where:
X = 2 - 9 3 (sec.)
Reverse Polarity
The CGW-T may be
setup to send a “reverse
polarity” command to the
PBX, in case a “call
answer” is detected. This
parameter is useful if call
accounting software is
active.
*320 + X
where:
X = 0 – 2
0 = No reverse polarity
1 = Reverse polarity only on
Outgoing calls
2 = Reverse polarity for
Incoming and Outgoing Calls 2
Output Volume Control. *330 + X
where:
X = 0 – 9 (9 is highest) 5