ITS Telecom CelluLine CGW-T, Installation And Programming Manual, Page: 14 / 30

8 CelluLine CGW-T Installation and Programming Manual
3.2 CelluLine CGW-T Installation
•
Mount the CelluLine CGW-T unit on the wall as a stand-alone unit or on the 6-fold wall
mount bracket, which is a separate accessory.
•
Connect the Antenna into the Ant. connector on the side panel of the CelluLine CGW-T
unit.
1
•
Connect the analog trunk interface of the PBX to the trunk connector on the side panel of
the CelluLine CGW-T unit.
•
Connect the power supply to the CelluLine CGW-T unit.
•
The unit will start the initialization and registration. At the end of the process, the LCD
will display the GSM signal status.
Note:
1
Experiment with the location of the antenna. The LCD gives an indication where you get the
best GSM reception.
The following figure gives a schematic representation of the CelluLine CGW-T unit setup.