ITS Telecom ADRA 1000, Installation And Programming Manual

Page: 27 / 64

DTMF Programming
OPERATION COMMAND DEFAULT
Place a call on hold.
Enables the call to remain
on hold. The caller is put on
hold for ten seconds before
trying to transfer the call
again.
*180 + B
where
B = Digit to be dialed by caller to put
the call on hold or * to put the call on
hold at the end of playback
Note: This option is valid only for the
Busy menu (script 22).
Blind Transfer to a busy
extension.
An immediate
attempt is made to transfer
the call to the extension
when the user dials the
transfer digit.
*185 + B
where
B = Blind transfer digit to be dialed
by the caller or * at the end of
greeting playback
Note: This option is valid only for the
Busy menu (script 22).
EAR 1000/2000 Installation and Programming Manual 4-9