40
X-C 6250 Pro (300) NT Users Manual
79-0030-001 11 January 2001
Turning the Computer On and Off
You can operate the computer while the battery is charging.
To turn on the computer
1 Press
FN+ON
(
FN+SPACEBAR
)
.
Note:
If the computer does not power on, restart it by holding down
both mouse buttons for at least 10 seconds, and then releasing the
buttons.
2 Adjust the display contrast control for a sharp, clear display.
•
FN+F4
lightens the display
•
FN+F5
darkens the display
Note:
If you have a 10.4-inch color display, these keys are not
active.
3 Adjust the backlight if necessary.
•
On a monochrome display, pressing
FN+F1
toggles the backlight
on and off.
•
On a color display, the backlight is on whenever the computer is
running. Pressing
FN+F1
toggles the MaxBright feature on and off.
4 Make sure the date and time are correct by choosing the Date/Time
icon from Control Panel and making any needed changes.
To turn off the computer
•
Press
FN+OFF
.
When you power the computer back on, the system resumes from
where you left off. To conserve battery power, turn off the computer
whenever you are not using it.
Note
The system automatically turns off (suspends) the unit after a
period of continuous idle time. You can resume where you left off by
pressing
FN+ON
.
All manuals and user guides at all-guides.com