134
X-C 6250 Pro (300) NT Users Manual
79-0030-001 11 January 2001
Miscellaneous
The computer wont turn off
•
Press
FN+OFF
.
If pressing
FN+OFF
does not turn off your computer, the system may
be locked up. Restart your computer by holding down both mouse
buttons for at least 10 seconds and then releasing the buttons.
•
The unit may have been idle for an extended period. Hold down both
mouse buttons for at least 10 seconds and then release the buttons.
The computer enters suspend mode too quickly
•
When there is no activity for a period of time, the computer turns off
or enters suspend mode. To extend this time, use the SCU and enter
a new time. See Section 5, Customizing Settings, for information
about accessing this utility.
The computer doesnt automatically suspend
•
Check to make sure the COM ports are off. For example, exit any
application that uses COM ports such as Speaker Phone.
•
Make sure external power is not connected. Some systems will not
suspend automatically when they are connected to external power or
when PC Cards are inserted.
•
Close any open files or directories on a PC Card.
•
Set your inactivity time to one minute in the SCU.
WARNING
If you increase the suspend time too high it may not
allow your computer to suspend.
All manuals and user guides at all-guides.com
