As the backup battery is constantly being charged, its charge status is not displayed.
See Also
Battery Information
Battery Conservation
Battery Charging
Battery Replacement
Battery Safety
Battery Storage
Battery Conservation
To conserve power, the handheld computer automatically switches itself off (suspends) after 3 minutes
of inactivity when on battery power.
See Also
Battery Information
Checking the Batteries
Battery Charging
Battery Replacement
Battery Safety
Battery Storage
Battery Charging
Use only the AC Adapter or vehicle charger supplied with your handheld computer.
Plug the handheld computer charging adapter connector into the COM1 (left) socket of the handheld
computer. Then connect the AC Adapter to a suitable AC mains power supply.
NOTE
The AC adapter connector has spring loaded clips that keep the adapter attached when the unit
is in use. Press in both clip latches before attaching or removing the AC adapter to prevent damage to
the spring loaded clips.
The battery pack may take up to three hours to fully recharge. Make sure that the pack is fully recharged
to 100% capacity so that the battery gauge calculations will be accurate.
The left green LED below the display flashes regularly while the battery is charging. When charging is
complete, the green LED stays lit. If the LED ever flashes irregularly, a charging error has occurred and
you should seek advice from your system provider.
See Also
Battery Information
Checking the Batteries
Battery Conservation
Battery Replacement
Page 6 of 17
Handheld Computer Help
05/05/2004
file://C:\Documents%20and%20Settings\jonathan\Local%20Settings\Temp\Handheld%2...
