72_0103_003
10 December 2002
© 2002 Itronix Corporation. All rights reserved.
Auto-Detect Hard Disks
When the Auto-Detect Hard Disks option is selected, the BIOS will automatically detect Primary Master and
Secondary Slave settings.
NOTE
If you Auto-Detect your Hard Disk Drive while your media bay drive is empty, you will need to reset the
Secondary Master to
Auto On
before you can use the CD-ROM (or other media devices).
72_0103_003
10 December 2002
© 2002 Itronix Corporation. All rights reserved.
Change Password
Change Supervisor Password
A supervisor password must be set before a lower-level password can be set. After selecting Change Supervisor
Password, press
Enter
. You will be prompted for the new password, and then again to verify it. Type in six or fewer
keystrokes. If you make an error, press
Esc
to start over.
Change User Password
With a User password, you can enter the Setup Utility and change or remove the User password, but you cannot enter
GoBook II™ Help
GoBook II™ Help
Page 45 of 74
GoBook II Help
9/30/2003
file://C:\Documents%20and%20Settings\harwoodm.ITRXNT1\Local%20Settings\Temp\~hhDDD5.htm