Using PC Cards
The Duo-Touch has a Type II PC Card Slot located on the top side of the computer. It supports 32 bit Card Bus 2.1
interface as well as Zoom Video when in landscape orientation. You can use this slot to interface between your Duo-
Touch and a variety of communications devices, such as network adapters, SCSI adapters, fax/modems, and
PC Card
Radios
. It can also provide additional data storage capacity.
Installing a PC Card
Removing a PC Card
Duo-Touch™ Help
1. The top side of a PC Card is usually identified with a label. Insert the card into the slot with the top up and the edge
with pinhole contacts going in first. You will feel some resistance as the card slides into the back of the slot.
2. PC Cards require drivers, or a program that allows the operating system to use a specific device. Many drivers are
included with Windows, but if not, you will be prompted to install the driver included with your card.
NOTE
Please read the instructions included with individual PC Cards. Some cards may be inserted with power on,
while others require that the computer be turned off.
1. If a PC Card is in use, you must shut down the Card before removing it.
2. Select the Safely Remove Hardware icon
on the right side of the Windows tray
taskbar
.
3. Choose the PC Card from the list of devices; then select Stop and OK.
4. When the Windows message appears, telling you that it is safe to remove the card, select OK.
5. Press the eject button (1) on the PC Card slot to release the eject button. It is spring loaded and remains hidden until
it is pressed.
6. Press the eject button again to release the PC Card.
72_0127_001
05 May 2005
© 2005 Itronix Corporation. All rights reserved.
Page 1 of 1
Using PC Cards
5/5/2005
mk:@MSITStore:C:\Documents%20and%20Settings\barvillj.ITRXNT1\My%20Documents...
Summary of Contents for Duo-Touch
Page 1: ......
