ITR Hurricane Zephyr HW, Installation And Operating Manual

Page: 21 / 89

International Thermal Research 3-1
Installing the Exhaust System
3.1 Before You Begin
For efficient and safe operation of the Hurricane® Zephyr™ HW
follow all recommendations for properly installing the exhaust. Any
deviations from these recommendations must be approved in
advance by ITR.
Although the heater’s exhaust produces very low carbon monoxide
emissions, caution is advised:
· Do not operate the Hurricane® Zephyr™ HW in an enclosed
area unless there is adequate ventilation.
· Isolate the Hurricane® Zephyr™ HW in a closed compartment
so that no air from the unit will infiltrate the living areas.
Heater exhaust can reach high temperatures; never install
exhaust parts close to combustible materials or through a
combustible wall or ceiling without fireproof protection. Heater
exhaust must be directed to the outside of the yacht away from
windows and air inlet vents. The heater exhaust system must be
installed following all specific ABYC standards.
3.2 Mounting Location
If all technical specifications for mounting the exhaust
cannot be met, don’t use the Hurricane® Zephyr™ HW. The
heater may perform poorly or be damaged if it is not
installed according to specifications.
Recommended Exhaust Outlet Locations
The following are recommended for yacht exhaust outlet locations:
· Mount the exhaust outlet outside the yacht, otherwise,
exhaust fumes could infiltrate the living space.
Section
3
!
DANGER