REMOTE CONTROL RUNNER
USER MANUAL
15
9. POSSIBLE INCIDENTS AND SOLUTIONS
INCIDENT
STATE
SOLUTION
The device won't start
None of the indicators
and
from the remote
control light up
Check that the battery is correctly inserted.
Check the charge status of the battery or
replace it directly with a charged one.
Both LEDs
and
from
transmitter blink
Remote control with blocked keyboard,
follow the steps in the "
Keyboard Locking
procedure
" section to unlock it.
Only LED S1 lights up
EEPROM error. Check on the remote
control that it’s inserted in its socket, if this
is the case and it still does not work,
contact the Technical Assistance Service.
LED S2 on the remote
control flashes
There are activated some pushbutton.
Check that all the remote control actuators
are in rest position.
The device doesn't
show errors but the
machine is not
working.
The receiver associated with
the remote control is
connected to the machine
but it still does not work
Connect the cable transmitter/cabin instead
of the receiver associated with the remote
control, and if the buttons do not activate
the outputs, it can be presumed that the
problem is with the machine.
