Receiver IT3G7R20
USER'S MANUAL
11
7. WORKING CHANNEL DISPLAY
It’s important to know the frequency channel you are working on when making a frequency change or
detecting possible interference from other devices on the communication between the transmitter and the
receiver.
To find out the frequency channel of the receiver, you must follow these steps:
Switch on the receiver by unlocking the STOP BUTTON from the transmitter and activating start.
Engage the STOP BUTTON to switch to the standby state. At this point the receiver will indicate the
working channel using the LEDs.
First the LINK LED (see Fig. 9 1) will flash as many times as there are tens in the frequency channel.
When the display of the tens is finished, the RUN LED (see Fig. 9 1) continues to display the units of the
working channel.
If an attempt is made to start the equipment while the channel is being displayed, it will be given
preference, the channel display will be stopped and the receiver will be started.
At the end of a frequency change, the receiver also displays the new working channel.
