● While the timer is running, tap the play button to pause the countdown. Tap it
again to resume.
● To reset the timer, tap on the time again to re-select your desired countdown
timer.
Calendar
View the calendar by swiping the screen left or right to see the previous or next month.
Settings
Volume
- Adjust the volume of your smartwatch by tapping the +/- on the screen.
Brightness
- Adjust the brightness of your smartwatch by sliding the brightness bar either
up or down as well as the duration of how long the watch display stays on.
Set Date
- To set the day, month, and year by swiping up and down
Set Time
- To set the time, swipe up and down on the hours and minutes.
Advanced Settings
● Memory- View the memory usage and storage free memory space.
● Factory Reset- Reset your iTouch Playzoom smartwatch
Computer Connect
You can connect iTouch Playzoom Smartwatch to a PC or Mac computer
using the
included micro USB cable
. Once connected, you can transfer files between the watch and
computer. Please follow the following steps to make the connection:
● Pull the rubber cover off of the micro USB port on the side of your watch.
● Insert the micro USB cable (small end) into the micro USB port on the watch.
● Insert the larger end of the micro USB cable into a USB port on the computer.
● You will see a removable drive, please use this to transfer files to and from the
watch.
tech
About
https://www.itouchplayzoom.com/
for product collections and technical
support.
Care and Maintenance
Keep the rubber cover of the micro USB port closed tightly while it is not in use in order to
prevent dust or water from getting into the micro USB port.
Keep the watch clean by wiping it with a slightly damp cloth.
Do not drop the watch on hard surfaces and do not expose it to moisture or immerse it in water.
Keep the lens clean. If the pictures taken are blurry, it could be because there is dust or dirt on
or around the lens. You can clean the lens by:
● Blowing on the lens
