CLOCK
–
Set time & date (required)
1.
The display should show the time & the day of the week. If not, tap
MODE
repeatedly until both are shown.
2.
Press and hold
LIGHT
for 5 seconds until seconds digits in the box begin to flash. Then let go.
3.
Tap
MODE
and the minutes will flash. Tap
ST/STP
to change the minute. Tap
MODE
to save.
4.
The hours will now flash. Tap
ST/STP
to change the hour, note the AM/PM indicator. Tap
MODE
to save.
5.
The date will now flash. Tap
ST/STP
to change the date. Tap
MODE
to save.
6.
The month will now flash. Tap
ST/STP
to change the month. Tap
MODE
to save.
7.
The year will now flash. Tap
ST/STP
to change the year. Tap
MODE
to save.
8.
Tap
LIGHT
to confirm time & date.
Note:
To temporarily display the date while in Time Mode, tap
RESET
.
ALARMS - Set alarms in chronological order starting with the earliest (required)
1.
Tap
MODE
repeatedly until Alarm
Mode is reached. “A1” is shown
in the box.
2.
Set Alarm 1, press and hold
LIGHT
until hour flashes. Tap
ST/STP
to change the hour. Tap
MODE
to save.
3.
The minutes will now flash. Tap
ST/STP
to change the minute. Tap
MODE
to save.
4.
Tap
LIGHT
to confirm Alarm 1 (A1).
5.
Tap
RESET
to select a different alarm (A1-A8) and repeat steps 2 through 4 to set it.
6.
Set alarm notification type. Tap
ST/STP
once for sound, twice for vibrate or three-times for both.
7.
Tap
MODE
repeatedly to go back to Time & Date.
Note:
To silence the alarm at alarm time, tap any button. We recommend tapping
LIGHT
.
Note:
All alarms repeat automatically at the set time(s) the next day.
LOCK
–
Disable the buttons to prevent accidental reprogramming (optional)
1.
The display should show the time & the day of the week. If not, tap
MODE
repeatedly until both are shown.
2.
Press and hold
MODE
and
RESET
together at the same time.
3.
“LOCK”
will appear in the top left-hand corner of the display.
4.
LIGHT
button will still function but
ST/STP
,
MODE
and
RESET
buttons have now been locked and disabled.
Unlock:
To unlock and enable all buttons hold
MODE
and
RESET
together at the same time. “LOCK”
will now
disappear.
Answers to Frequently Asked Questions
1.
Change the battery if the buttons stop working, the alarm is faint, or if the watch alarms/vibrates erratically.
2.
Illumination: Tapping the
LIGHT
button only illuminates the digits (not the entire display). The function will
only be noticeable when in a very dark room. At all other times, even at low light, the display will be readable.
To switch between 24-Hour format and AM/PM format:
Tap ST/STP when the current time is shown
1-800-549-0095
e-pill
CADEX VibraPlus
8 Alarm Vibrating Watch
Quick Setup Guide
