TROUBLESHOOTING RC-100DX.RC-115DX.RC-137DX
11
Paper Cutting Precision
1
Adjust the backgauge right & left, upper & lower and exact size.
Paper cutting precision is affected by not only paper cutter performance but paper
quality, paper storage condition, flow pattern, knife edge angle, knife edge
sharpness, clamp pressure, product hardness and knife hardness, etc.
Follow the instruction manual <Adjustment Method - Backgauge Adjustment> and
<Operation Method - Correction of Errors Between Exact Size and Indicated
Size>.
2 Residual cutting arises.
Check the knife for cutting quality, nicked edge and the cutting stick, and adjust
the knife balance and knife height.
Cut Line Adjustment
Where the cut line is not displayed even when the working lamp switch is
operated, the cut line bulb (24 V 45 W), fuse F4 (5A) and enamel resistor (1 ohm
40 W) are assumed to be faulty.
To replace the cut line bulb, turn the machine power OFF, remove the cover in the
main body upper part, and turn the bulb 90 degrees counterclockwise while
pushing it in: the bulb can be detached from the bulb holder.
This spare bulb is provided in the electric box 2.
Working Lamp Adjustment
A commercially available fluorescent lamp apparatus is used.
Replace the glow or lamp according to the symptom of malfunctions with the
machine power "OFF".
Summary of Contents for Robocut RC-100DX
Page 1: ...TROUBLESHOOTING PAPER GUILLOTINE TYPE...
Page 21: ......
