4
www.itmtools.com.au
ASSEMBLING DIAGRAM
WALL FAN
1. Mounting The Wall Fan To The Wall
• CAUTION: The fan must be used in the upright position and right fastened to
the wall.
•
Determine the desired location of the wall fan and ensure that your wall structure is
capable of handling the additional load of the mounted product.
•
Mark the three screw holes with a pencil by holding the hanging bracket (9) to the
wall.
•
Note: Ensure the 2 holes on the hanging bracket (9) holes are horizontal prior to
drilling.
•
Drill the holes at the 3 pencil marks to suit the anchor being used (not supplied)
•
Mount the hanging bracket (9) securely on the wall with 3 fixing anchors (not
supplied) as per the fastener manufactures instructions.
•
Hang the motor assembly onto the fan fixing bar (8) then fix the fan fixing bar (8) onto
the hanging bracket (9) (fig 1a, 1b,1c)
2. Assembling The Rear Safety Grill To The Fan Motor
•
Align the rear safety grill (2) to the fan motor housing so that the fan grill securing
hole is at the bottom of the fan and align the 4 screw holes (fig 2a).
•
Firmly tighten all of the four screws (fig 2b).
3. Assembling The Fan Blade To The Fan Motor
•
Rotate the fan motor shaft until the rebated flat area on the shaft is in the 12 o’clock
position.
•
Locate the lock screw in the fan blade coupling; while aligning the screw and motor
shaft rebated flat area push the fan blade (3) all the way onto the shaft and firmly tighten
the grub screw by rotating in a clockwire direction (fig 3a), (fig 3b).
4. Assembling The Front Safety Grill To The Fan Motor
•
Align the top locking clip on the front safety grill (1) to the top center of the rear safety
grill (2) that has already been secured to the fan motor (fig 4a).
•
Lock the side and bottom clips in place (fig 4b) & (fig 4c) Note: The logo should be
level or horizontal
•
Secure the front & rear safety grill together using the fan grill securing hole in the
bottom of the fan grill by inserting the fixing screw and nut provided (fig 4d) & (fig 4e).
