24
NOTICE:
Do not insert anything other than the light guide connector found at the end of the video
scope into the light source aperture. The inside lens can be damaged by scratches.
1. Plug the fiber optic bundle into the light source
aperture before turning the power on. Light
Source Power Switch / Light Intensity control
knob should be in the OFF position, as the
sweep indicates.
2. Turn ON the Power Switch.
3. Set the light intensity to the desired level by
rotating the knob left to right.
4. Turn the Light Source Power Switch / Light
Intensity knob to OFF position when not in use.
S
IDE
P
ANEL
–
W
HITE
L
IGHT
S
OURCE
C
ONTROLS
S
HOWN
NOTICE:
The White LED light source has no user replaceable parts. Contact ITI if repair is required.
10.2 B
LUE
L
IGHT
S
OURCE
The Blue Light Source is used to supply a narrow frequency, high intensity, blue light, when a white light source is
not appropriate for video and optical illumination.
1. The Blue Light Source will illuminate best if the White Balance (see Main Control Panel section 6) is in the
SET mode. While the White Balance is in the AUTO mode, view a well-lit white surface illuminated with
white light then push the switch to change to SET mode. This will lock the White Balance and prevent the
camera from trying to compensate for the Blue Light.
2. Plug the fiber optic bundle into the light source before turning the power on. Turn the Blue Light Intensity
Control to the minimum position by rotating the lever to the most right position.
3. Turn the IR/Blue Light Source Power switch to the Blue position. The bottom green LED will turn on
signaling that the Blue Light Source is on.
4. Set the light intensity to the desired level by rotating the lever left and right.
5. Turn the IR/Blue Light Source Power Switch to OFF position when not in use.
NOTICE:
The Blue LED light source has no user replaceable parts. Contact ITI if repair is required.
Specifications
Lamp: Royal Blue LED
Wave length: 440 nm peak emission
Lamp: 8 to 24 Volts DC, 5 Watts, 700 mA
Lamp life: more than 5000 hours
Dimming System: Manual shutter (light intensity control)