manualshive.com logo in svg

ITI ESL 562, Installation Instructions Manual

Share
Download
ITI ESL 562 Installation Instructions Manual Download Page 6

6

ESL Smoke Sensor Model 562

Specifications

Preliminary

Specifications

Compatibility: 

Advent, Commander 2000 and 
Custom Versions with software 
versions 4.1 and later UltraGard, and 
Custom Versions, Concord, Concord 
Express, Simon

Dimensions: 2.25 

× 

5.0

″

 (without mounting 

bracket) 
2.25 × 5.5

″

 (with mounting bracket)

Temperature Range: 32° to 100°F 

Humidity:

70% non-condensing

Power Source: 

Two 3-volt lithium batteries of the 
same type. UL-approved types: 
Sanyo CR123A, Panasonic 
CR123A, Duracell DL123A.

Notices

Agency Listings: UL 217 (60-848-95)—Residential Installations

UL 268 (60-849-95)—Commercial Installations

This device complies with part 15 of the FCC rules. Operation is 
subject to the following two conditions:
This device may not cause harmful interference.

This device must accept any interference received, including 
interference that may cause undesired operation. 
Changes or modifications not expressly approved by Interactive 
Technologies, Inc. can void the user’s authority to operate the 
equipment.
FCC Registration No.: B4Z-773A-SMOKE

6 5 1 - 7 7 7 - 2 6 9 0

6 5 1 - 7 7 9 - 4 8 9 0

ITI, Advent, CareTaker, Commander, UltraGard, and Simon are 
registered trademarks of Interactive Technologies, Inc. Concord, 
Concord Express, and Learn Mode are trademarks of ITI.

Summary of Contents for ESL 562







Reviews:

No comments

Brands by name

Popular brands

Load more brands