ITI DNA-A211-I User Manual Download Page 9

Page: 9 / 103

DNA-A211-I User Manual

Page 9 of 103

References

Documents

Modem functional specifications

Supporting protocols

ITU-T G992.1

(G.dmt) standard, Annex A

ITU-T G992.2

(G.lite) standard, Annex A

ITU-T G992.3

(ADSL2 G.dmt) standard, Annex A

ITU-T G992.5

(ADSL2+) standard, Annex A, Annex M

IEEE G802.11b/g

Wireless standard

Notices and conventions

The following table lists notices icons used in this document.

Icon

Description

Information that contains important features or instructions but is not hazard-

related.

Information to alert of potential damage to a program, data, system, or device. If

not avoided, may result in minor or moderate damage. It may also alert against

unsafe practices and potential program, data, system, device damage.

Information to alert of operations that may cause potential accident, casualty,

personal injury, fatality or potential electrical hazard. If not avoided, could result

in death or serious injury.

Figures

This document provides figures as example. These examples contain sample data. This data may vary

from the actual data.

Summary of Contents for DNA-A211-I


































































































Search results

Summary of Contents for DNA-A211-I

Reviews:

ITI DNA-A211-I, User Manual, Page: 9 / 103

Search results

Summary of Contents for DNA-A211-I

Reviews: