ITI DNA-A211-I User Manual Download Page 8

Page: 8 / 103

DNA-A211-I User Manual

Page 8 of 103

Preface

This introductory part of the DNA-A211-I User Manual explains the primary objective, intended

readers, document organization, references, and various conventions used in this document. The

readers of this document are recommended to go through this part to understand how to read this

document.

Objectives

The primary purpose of this document is to present the guidelines for using the DNA-A211-I

system. This document covers the system overview, features, installation methods, configuration

details and thereby giving the overall description of the system.

Intended Readers

This manual is intended to use as a user reference manual for the people using this system. The

user of this document is expected to have a minimum and introductory understanding of the

following:

Telecommunications

network

DSL

technologies

Ethernet

technologies

Broadband

Document organization

Part-1

: Getting Started

This part of the document details the system overview, features, hardware installation, management,

default values, and minimum configuration details of the system.

Part-2

: Command Line Interface

This part of the document details the command line interface, commands etc.

Part-3

: Web management Interface

This part of the document details the GUI used to configure and manage the system. This chapter

also details the procedures to configure the system.

Part-4

: Appendix

This part of the document explains the safety precautions and measures when handling the system,

packaging details of the system.

Part-5

: Acronyms

Summary of Contents for DNA-A211-I


































































































Search results

Summary of Contents for DNA-A211-I

Reviews:

ITI DNA-A211-I, User Manual, Page: 8 / 103

Search results

Summary of Contents for DNA-A211-I

Reviews: