Ithaca ITHERM 280, Programmer'S Manual

Page: 226 / 318

* % 8 %.
#
- - - - 4 '4 4 '4 4 '4 4 '4 ( ) ( ) ( ) ( )
Off 00H <0> Pin 3 is Low 0
On (03H) (3) Pin 3 is High
1 – 7 Off 00H <0> Not used; fixed to Off
Table 45 Peripheral Status (<n> = 0, 48)
Function Transmit Paper Sensor Status
ASCII [ESC] v
Hexadecimal 1BH 76H
Decimal <27> <118>
Description The [ESC] v command has been replaced by the [GS] r command. The [ESC] v
command transmits paper status has been replaced by the [GS] r command.
The iTherm
®
280 return paper status as specified below. If the Electronic Journal
is enabled, Journal Low and Out are supported by this command
* 7 + % * 7 + % * 7 + % * 7 + %
-
- -
- 4 '4
4 '4 4 '4
4 '4 ( )
( ) ( )
( )
Off 00 <0> Receipt Paper present 0,1
On 02H <2> Receipt Paper Low or not present
Off 00 <0> Cover is closed 2,3
On 04H <4> Cover is open
4 Off 00 <0> Not used, fixed Off
Off 00 <0> Slip is present 5
On 04H <4> Slip is not present
6 ON 20H <64> Fixed On
7 Off 00 <0> Not used, fixed Off
* 7 * + %
* 7 * + % * 7 * + %
* 7 * + %
- - - - 4 '4 4 '4 4 '4 4 '4 ( ) ( ) ( ) ( )
Off 00H <0> Journal Space adequate > 8K 0
On 01H <1> Journal Space Low < 8K
Off 00 <0> Receipt Paper present 1
On 02H <2> Receipt Paper Low or not present
Off 00 <0> Cover is closed 2
On 04H <4> Cover is open
Off 00 <0> Journal is active and not full (Cover
Closed)
3
On 08H <8> Journal Full and has been disabled (or
Cover Open)
4 Off 00 <0> Not used, fixed Off
Off 00 <0> Slip is present 5
On 04H <4> Slip is not present
6 ON 20H <64> Fixed On
7 Off 00 <0> Not used, fixed Off
Table 46 Paper Status