9
21
21
R3
R3
Connecting Timing Belt Reverse Unit 8 80 R25 to Line 8 profiles (con-
struction height 80 mm and over).
Separating the special T-Slot Nut at the pre-determined breaking point.
Fastening arrangement of Timing Belt Reverse Unit 8 40 R25 on different
profiles depending on the position of the Timing Belt when fed back through.
Attachment options
Next, fasten the Timing-Belt Reverse Units to the support profile and align the
Timing Belt with the profile.
Securing and tensioning Timing Belt R25 T10
To secure and tension the Timing Belt on a guide carriage, you will need to fit a
Timing-Belt Tensioner Block in the correct width at each end of the Timing Belt.
