3
Correct use
Technical Data
1. During transportation
Observe the handling instructions on the packaging. Until it is installed, the
product must be stored in its original packaging, protected from moisture and
damage. Ensure that moving parts are secured when in transit and cannot
cause any damage.
2. During installation
Always ensure the relevant section of your overall system is not live before
installing the product and/or plugging it in or unplugging it. Ensure the system
cannot be switched back on. Lay cables and lines in such a way that they can-
not be damaged and do not represent a trip hazard. Avoid areas that pose slip,
trip and fall hazards.
3. During start-up
Allow the product to acclimatise for a few hours before starting it up. Ensure
that LED Light Fitting is securely and safely integrated into the system. Only
start up a product that has been installed in full.
4. During operation
Ensure that only persons who have been authorised by the operator have ac-
cess to the immediate operating environment of the system. During emergen-
cies, malfunctions or other irregularities, deactivate the system and ensure that
it cannot be switched back on. Prevent the possibility of persons becoming
trapped in the system’s hazard zone.
5. During cleaning
Close all openings with suitable protective equipment to ensure that cleaning
agents cannot penetrate the system. Do not use aggressive cleaning substanc-
es. Do not use a high-pressure cleaner when cleaning the system. Wipe with a
damp cloth only.
6. During maintenance and servicing work
Carry out the prescribed maintenance work at the intervals stipulated in the
user guide. Ensure that no cables, connections or components are detached or
removed. Ensure the system cannot be switched back on.
7. During disposal
Dispose of the product in accordance with the national and international regula-
tions that apply in your country.
The LED Light Fittings must only be used in accordance with the technical data
and safety requirements set out in this document. Internal company require-
ments and the regulations that apply in the country where the product is being
used must be observed. You must not make any design modifications to the
LED Light Fittings yourself. We will assume no liability for any resulting damage
or injury.
You may only install, operate and maintain the LED Light Fittings if:
▪
The LED Light Fittings have been integrated into their surroundings in a pro-
per and safe manner,You have carefully read and understood the installation
guide,
▪
You are appropriately qualified,
▪
You are authorised to do so by your company,
▪
You are using only original equipment from the manufacturer.
▪
The LED Light Fittings are suitable for connection to a 24V DC power supply
only.
▪
They are designed for indoor use.
▪
The LED Light Fittings must not be opened.
Unsafe or inappropriate use of the LED Light Fittings runs a risk of serious
injury through electric shock.
Improper use
Improper use is defined as any use of the product for purposes other than those
authorised in the installation guide and under the definition of correct use. We
will assume no liability for any resulting damage or injury.
▪
Designed for indoor use
▪
Power supply: 24V DC
▪
Diffuser and grating for glare-free lighting
▪
Scope of supply includes fastening set for simple installation
V
IN
: 24 V DC (-10%/+15%)
P
IN
: max. 15W/max. 30W
Protection class: IP40
Nominal power of lamp 15W/30W
Colour temperature ~4000 K
Average service life 50,000 hrs
Energy efficiency class A
Designed for indoor use: Yes
Temperature range for use: -15 °C – +40°C
