Listening to a CD
Press the FUNCTION button to select CD function.
Open the tray, and place the CD on the tray.
Close the tray and start playing the CD.
The CD will start playing from the first track.
Press the SKIP+ button once to go the start of the next track.
Press the SKIP/ Fast Forward button once to go back to the start of the current track.
Press the button twice to go back to the start of the previous track
Press REPEAT button once to repeat the current track and the REPEAT
light will flash on the display; Press the REPEAT button for the second time
to repeat all tracks from begins to end, and the REPEAR light will light
up all the times.
Press the PROG. Button, the unit will have program function.
In stop state, press the PROG. Button, the LCD display will show and flash 01,
Then press the FORWARD or BACKWARD button to select the tracks,
press the MEMORY button to repeat this step to program, and it can be
up to 20 songs.
When press STOP button, You can delete this programed function.
Pausing the CD play. Pressing the PLAY/PAUSE button will restart the CD
where it was paused.
Do not switch the unit off while playing a CD as this will damage the unit.
Stopping the CD when it is playing
Fast Reverse (SKIP/Fast Forward (SKIP+FF) you can reverse or forward to any point in a
selected track by pushing and holding the SKIP- or SKIP+ button. NOTE: Do not push both but-
tons together as this may damage the unit. As the unit is tracking quickly, forward or backward
you will hear your selection playing at a distorted speed. Simply release the depressed button to
continue playing at normal speed at the desired position in the selected track.
Listening to the Radio
Press the FUNCTION Button to select AM/FM
function. The AM/FM indicator will light up all the times.
Kindly please note the indicator will light all the time
once it is powered on.
2.Tune to the desired frequency.
Antenna
For optimal FM reception be sure to stretch the built-in
FM antenna wire located at the lower back of the unit and
move it around until the station you have tuned in is being
received clearly
Cleaning and & Maintenance
Cleaning CDS
Use a soft cloth to wipe off any fingerprints and dust from the disc surface.
Wipe in a straight line from the centre to the outside of the disc. Small dust particles and light
stains will not affect reproduction quality.
Never use chemicals such as record sprays, anti-static sprays, benzene or thinners to clean your
CDs.
To reduce the risk of scratches, please put the CD back into the bag after using.
Do not expose CDs to direct sunlight, high humidity or high temperatures for long periods.
Do not stick paper or write anything on either side of the CD.
Only discs displaying this symbol can be played on this unit.
Cleaning the Lens
A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not work
Please use cleaning disc.
