9
www.itek-products.co.uk
Bluetooth:
1. Press the Power/Mode button on the
control panel or press the “MODE” button
on the remote repeatedly until ‘bt’ shows
on the LED screen. The LED will flash until
a device has been paired with speaker.
2. Pair a bluetooth enabled device with your
jukebox by selecting ‘I60018CD’ from the
listed devices on your smart phone/tablet.
When pairing is successful, the LED icon
‘bt’ will light up and you will hear a sound.
3. You can now play or skip songs using
your Bluetooth device, remote control or
jukebox control panel.
AUX-IN:
Requires a 3.5 mm cable (included).
1. Connect a 3.5 mm cable to the AUX-IN
1 jack. Connect the other end of the 3.5
mm cable to a smart-phone or other
audio source.
2. Press the Power/Mode button on the
control panel or press the “MODE” button
on the remote repeatedly to select AUX-IN
mode.
3. You can now play or skip songs using
your Bluetooth device.
Changing LED light:
1. Press the LED ON/OFF button on the
remote to turn the LED lights on. Press
this button again while the lights are
activated to turn them off.
TROUBLESHOOTING
The following checks will help correct some of
the most common issues with the unit. Check
that the power cord is firmly connected to the
unit before going through the check list below.
Should any problem persist after you have
made these checks, have the unit checked
by a qualified professional or contact our
Customer Support team.
Problem
Possible Causes and
Solutions
The jukebox has
no power.
Ensure that the adaptor has
been properly connected.
Check that the jukebox has
been switched on at the mains
power supply.
The jukebox
is not playing
sound.
Check that the volume level
is set at an audible level and
adjust accordingly.
Unable to pair
a Bluetooth
device.
Check if the device is
compatible with the jukebox
and ensure the Bluetooth
function on your device is
switched on.
The jukebox may not be set
to the correct mode. Press
the source button to select
the Bluetooth function – when
the Bluetooth indicator light is
flashing, search for ‘I60018CD’
on your device.
The remote
control is not
working.
The battery may be exhausted.
Replace with a new battery.
Make sure the remote is
pointed at the jukebox during
use.
The sound is
distorted.
The volume or bass level
may be too high. Reduce the
volume and/or bass levels to
increase sound clarity.
Note:
The normal function of the product
may be disturbed by strong electro-magnetic
interference. Should this occur, simply reset
the product to resume normal operation. If the
issue persists, please move the product to a
location free from interference.
