Output Commands
Copyright© Itech Electronic Co., Ltd.
32
Related Command
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRe
ment]
This command is used to set the current step.
Command syntax
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]
Arguments
Current value
Unit
A|mA
Query syntax
[SOURce:]CURRent[:LEVel][:IMMediate]:STEP[:INCRement]?
[SOURce:]CURRent[:LEVel]:TRIGgered[:IMMediate][:I
NCRement]
This command is used to set the trigger current. Only applicable to IT6300A/B
series models.
When the instrument receives a trigger signal (*TRG command or USB or GPIB
hardware level trigger signal), the instrument automatically sets the current to
the current value set in this Trigger command.
Command syntax
[SOURce:]CURRent[:LEVel]:TRIGgered[:IMMediate][:INCRement]
Arguments
Current value|Min|Max|Def|Up|Down
Unit
A|mA
Query syntax
[SOURce:]CURRent[:LEVel]:TRIGgered[:IMMediate][:INCRement]?
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude]
This command is used to set output Voltage value.
Command syntax
[SOURce:]VOLTage[:LEVel] <NRf>
