IT-E151AUser Manual
Copyright © ITECH Electronics Co., Ltd.
ii
Regulatory Markings
The CE mark is a registered
trademark of the European
Community. This CE mark shows that
the product complies with all the
relevant European Legal Directives.
The instrument complies with the
WEEE Directive (2002/96/EC)
marking requirement. This affixed
product label indicates that you must
not discard the electrical/electronic
product in domestic household waste.
This symbol indicates the time period
during which no hazardous or toxic
substances are expected to leak or
deteriorate during normal use. The
expected service life of the product is
10 years. The product can be used
safely during the 10-year Environment
Friendly Use Period (EFUP). Upon
expiration of the EFUP, the product
must be immediately recycled.
Waste Electrical and Electronic Equipment (WEEE)
Directive
2002/96/EC Waste Electrical and Electronic Equipment
(WEEE) Directive
This product complies with the WEEE Directive (2002/96/EC)
marking requirement. This affix product label indicates that you
must not discard the electrical/electronic product in domestic
household waste.
Product Category
With reference to the equipment classifications described in the
Annex I of the WEEE Directive, this instrument is classified as a
“Monitoring and Control Instrument” product.
To return this unwanted instrument, contact your nearest ITECH
office.
Declarations of Conformity
IT8600 Electronic Load complies with the following EMC (electromagnetic
compatibility), safety and environmental standards:
EC Declaration of Conformity - EMC
The instrument complies with EMC requirements of Directive 2004/108/EC.
Compliance was demonstrated to the following specifications as listed in the
Official Journal of the European Communities:
EN 6100061326-1:2006: Electrical equipment for measurement, control
and laboratory use - EMC requirements. ¹²³
CISPR 11:2003. CISPR 11:2003 Radiated and conducted emissions,
Group 1, Class A
IEC 61000-4-2:2001. Electrostatic discharge immunity
