ITC TS-9208H, User Manual

Page: 14 / 50

13
7. serial port instruction control
It tests machine by PC series port, connect the test sample by the serial port cable,set PC
series port test machine's Baud rate to be 9600bps, data:8bits, stop:1bit, correction digit:
w/o, flow control: w/o. serial port instructions are design to offer the control for center control
system. It can be connected PC to internet access for internet testing , set same serial port
instruction, network parameter could be defined by the serial port instruction.
8. Instruction operation
Instruction character description:
[X1],[X2], … ,[Xn] means the corresponding input port
[Y1],[Y2], … ,[Yn] means the corresponding output port
[TX1],[TX2], … ,[TXn] means the corresponding input series port/IR transmition channel
[RX1], [RX2], … , [RXn] means the corresponding input series port/IR reception channel
[TY1] ,[TY2], … , [TYn] means the corresponding output series port/IR transmition channel
[RY1] , [RY2], … ,[RYn] means the corresponding output series port/IR reception channel
n is the device's input/output ports quantity, eg: TS-9232H,n max 32.