ITC TS-211, Operation Instruction Manual

Page: 4 / 6

07 07
l
96k Hz Sampling Frequency, 24-bit A/D and D/A converter, 32-bit DSP processor.
l
3RCA Optional /automatic Audio Signal Input, Provide three groups of five Mic Input, 5.1 or 3.1 or 4
channel output.
l
Provide USB Cable to connect with PC .Provide Remote Control and Infrared Remote control.
l
Directly to use the function keys on front panel or Connecting with PC to operate the device
l
10 kinds of user programs can be stored into the device. 10 kinds of Preset programs are provided
before leaving factory.
l
The device can be locked through setting password by “System” on the panel , in order to avoid the
setted programs damaged.
l
Each Output Channel comes with independent 7-Bands EQ(5PEQ Lo-Shelf Hi-Shelf). A high-
pass filter and a low-pass filter. 3 kinds of different modes. Gain is adjustable from -30dB to +15dB .
l
LCD screen and 7-Bands LED Digital Level Meter showing status of Input ,Output, Mute and Edit.
l
Delay ,Phase Control and Mute setting are all available in each Input and Output channel. The
output delay is up to 60ms.
l
Channel Effect, microphone volume, music volume and effect volume of each Channel can be
controlled .
l
Microphone comes with 4 levels of feedback functions. Both Microphone and Music Signals come
with Noise Gate.
l
Effects come with 3-Bands Parametric EQ and a pair of Hi/Lo -cut filfter.The ratio between echo &
reverb can be adjusted.
l
All Channels can be controlled through connecting Central Console and the device by S Terminal.
Thank you to select our Karaoke pre Amplifier Your choice of our products fully show your
professional view in these products.
With digital processing automatic and intelligent full functions and other features KP6 is
designed for exciting Equipments of projects VIP luxury karaoke rooms projects, whole sales Kareoke
projects permanent installation and other senior entertainment build up projects
In order to let you familiar with and use this product well please read this manual .
CAUTIONS
To prevent a short Circuit keep away from wet or humid areas
Turn off the device immediately in case of water damage and find an authorized technician for
repairs Do not open the device yourself unless you are an authorized technician
When appear with an exclamation mark the device is under operation and repair and the alert
should be on
When flashes appear with an arrowhead signal the device had elevated voltage running through
it Please do not touch the device for any reason
FEATURES
VIII. Operation Introduced
Equipment operation using the PC interface of the help menu, simply open the control software
Before this pre amp connected the software should be installed first Pls find the file with exe
Suffix in the attachable disk and run the program Find“software”to install and select “Karaoke
pre Amp” and select the “Install processors applications” the install is complete when show below
interface
Noted before linkage operation need install USB Driver in attachable disk detail pls refer the
software help menu
Recall program view parameters help, boot set up option etc
Click on the menu in the help, pop up the following file, find the parts which you need ,and reading