!
SAFETY OPERATIONAL GUIDANCE
In order to make sure the correct operation and safety using, please comply with
the following conditions when installation, operating and maintenance.
1) Make sure the connection of the ground wire is well enough when installation.
Do not use two-core plug. And make sure the input voltage of power supply is
as same as the one marked on the main controller.
2) Do not open the cover of the unit without permission especially the
high-voltage components marked with AC 100V to 240V, or there is risk of
shock.
3) Do not put the unit in extremely cold or hot place.
4) The unit will be heating when working. Please keep environment ventilation to
avoid overheating.
5) Please power off the unit in wet weather or not in use.
6) Please disconnect the AC power wiring from the AC power supply before the
below operations:
A. Remove or re-assembly any parts of the unit.
B. Disconnect or re-connect any plug of the unit or other connection
7) Non professionals without permission, please do not attempt to open the
enclosure,do not repair, in order to avoid the accident or exacerbation of
equipment damage degree.
8) Don't take any corrosive chemical powders or liquids spilled in the equipment or
in the vicinity of.
Summary of Contents for TS-0604M
Page 12: ...9 Figure 2 Figure 3...
